CNC Machinist – Manual Horizontal & Vertical Mills

This job posting expired and applications are no longer accepted.
Elliott Group
Published
November 14, 2023
Expires
December 14, 2023
Location
Jeannette
Job Type
Wage Range
  • Above $30 Per Hour
Criminal Background Consideration
All Legal Backgrounds Considered
Driver’s License Required
No
Public Trans Available
Yes

Description

Overview & Responsibilities

 

The primary function of the position is to perform all the required lay-out, set-up, manual machining, CNC machining, subassembly, tool setting, deburring parts, and dimension checking (geometric tolerances) in our heavy machining shop.

 

Responsibilities

  • Obtains raw materials/parts from stock, drawings, tools, fixtures, templates and other materials as required.

  • Works from and interprets prints, drawings, work lists, work order books, short forms, manuscripts, tool set-up sheets, part set-up sheets and bills of material. Verifies that materials, drawings, route sheets, manuscripts and tool and part set-up sheets are in agreement with work order book.

  • Sets up and operates machines, monitors performance to maximize output and makes adjustments as necessary.

  • Edits numerical control programs using machine control and records data or changes on manuscript and set-up sheets as required. Loads programs into machine, operates machine manually or initiates program controlled machine cycle. Produces simple part programs using MDI.

  • Stores and retrieves part machining data on punch tape, floppy disk, DNC system or retains in memory as required.

  • Performs simple layout operations and assembles and disassembles as required.

  • Checks parts with various precision measuring devices and prepares department data sheet as required. Reports defective parts, material, equipment, and tooling to supervisor.

  • Adjusts, changes, sharpens or dresses tools as required. Uses various tool setting equipment to assemble, preset and change tooling as required independently and simultaneously with machining operations.

  • Deburrs as required. Performs finish deburring operations independently and simultaneously with machining operations and stamps/stencils parts for identification purposes.

  • Cleans, dries and preserves materials or parts after machining operations as required.

  • Performs material handling functions using hoists, overhead cranes, fork lift trucks and etc., performing the necessary hooking and unhooking, driving, etc., as required.

  • Reports production count, time and identifying data as required.

  • Performs routine and preventative maintenance on machines and fills out check list as required. Adds replacement oils and coolants to machine.

  • Performs the required machining or processing operations and verifies that the operation is complete by signing off the appropriate operation and/or set up. Follows established Company manufacturing procedures such as Department Operations Manual, Shop Practices, Process Specifications, etc.

  • Verifies accuracy of measuring instruments using calibrated standards and using measuring instruments with current calibration.

  • Checks motor, brakes, steering, horn, etc., on motorized handling equipment to ensure proper and safe operation.

  • Maintains good housekeeping, removes chips from machine and places in proper hopper, follows safe working practices and observes all safety rules.

Key Requirements

Qualifications

Minimum:

High school Diploma or equivalent

Must be available for all shifts.

Must be available for Overtime.

Preferred:

Prior machining of steam turbine components and centrifugal or axial compressor components preferred.

Skilled Trade certification or Journeyman papers.

Veterans with machinist mate experience encouraged to apply.

Select application method

More Articles & Posts